Dr. Pedro Cortes
Professor
Rayen School of Engineering
Moser Hall 2064
phone: (330) 941-7455
-
Intellectual Contributions
-
2024
"Frequency selective asymmetric coupled-fed (ACS) antenna using additive manufacturing"
S. Lamsal, A. Uya, S. Itapu, F. Li, P. Cortes, V. Borra
Memories-Materials, Devices, Circuits and Systems, Elsevier, volume 8, p. 100111
-
2024
"A High-Temperature Thermocouple Development by Additive Manufacturing: Tungsten-Nickel (W-Ni) and Molybdenum (Mo) Integration with Ceramic Structures"
A. Islam, V. Borra, P. Cortes
arXiv preprint arXiv:2408.04800
-
2023
"Impedance Measurements Using a High Precision, Low Power Analog Front End"
B. Kuzior, V. Borra, F. Li, B. Park, P. Cortes
-
2023
"Harmonic content analysis of a soft starting variable frequency motor drive based on FPGA"
Y. Sapkota, S. Devkota, V. Borra, P. Cortes, S. Itapu, F. Li
, p. 1--5 -
2023
"Design and Fabrication of Terahertz (THz) Antenna Using Aerosol Jet Printing"
A. Uya, S. Lamsal, S. Itapu, F. Li, P. Cortes, G. Trovato, L. Dong, V. Borra
, p. 157--161 -
2022
"Transient Thermal and Electrical Characteristics of a Cylindrical LiFeS2 Cell with Equivalent Circuit Model"
K. Alsharif, A. Pesch, V. Borra, P. Cortes, E. MacDonald, F. Li, K. Choo
9th International Conference on Fluid Flow, Heat and Mass Transfer -
2022
"Transient Thermal and Electrical Characteristics of a Cylindrical LiFeS2 Cell with Equivalent Circuit Model"
K. Alsharif, A. Pesch, V. Borra, P. Cortes, E. MacDonald, F. Li, K. Choo
, volume 14, p. 155 -
2022
"Threshold Switching in CdTe Photovoltaics"
S. Devkota, K. Nyako, B. Kuzior, V. Karpov, D. Georgiev, F. Li, P. Cortes, V. Borra
ECS Transactions, volume 109, issue 1, p. 3
-
2022
"Low impact velocity modeling of 3D printed spatially graded elastomeric lattices"
. Diosdado-De la Pe\~na, Jose Angel, C. Dwyer, D. Krzeminski, E. MacDonald, . Salda\~na-Robles, Alberto, P. Cortes, K. Choo
Polymers, volume 14, issue 21, p. 4780
-
2022
"Effect of laser irradiation on the tribological properties of RF-sputtered nickel oxide (NiO) thin films"
S. Itapu, V. Borra, F. Li, P. Cortes, M. Kumar
Vacuum, volume 205, p. 111461
-
2022
"A novel modal representation of battery dynamics"
K. Alsharif, A. Pesch, V. Borra, F. Li, P. Cortes, E. Macdonald, K. Choo
IEEE Access, volume 10, p. 16793--16806
-
2022
"A Novel Modal Representation of Battery Dynamics"
K. Alsharif, A. Pesch, V. Borra, F. Li, P. Cortes, E. MacDonald, K. Choo
IEEE Access, volume 10
-
2022
"A Coupled Thermo-Mechanical Dynamic Characterization of Cylindrical Batteries"
K. Alsharif, A. Pesch, V. Borra, F. Li, P. Cortes, E. Macdonald, K. Choo
IEEE Access, volume 10, p. 51708--51722
-
2022
"A Coupled Thermo-Mechanical Dynamic Characterization of Cylinbdrical Batteries"
K. Alsharif, A. Pesch, V. Borra, F. Li, P. Cortes, E. MacDonald, K. Choo
IEEE Access, volume 10
-
2022
"A copper pyramidal fractal antenna favricated with green-laser powder bed fusion"
K. Johnson, E. Burden, M. Shaffer, T. Noack, M. Mueller, J. Walker, E. MacDonald, P. Cortes, J. Quintana
-
2022
"4D Printed Shape Memory Polymers: Morphology and Fabrication of a Functional Antenna"
T. Cersoli, M. Barnawi, K. Johnson, E. Burden, F. Li, E. MacDonald, P. Cortes
Recent Progress in Materials, volume 4, issue 2, p. 1--17
-
2022
"3D Printed Dual-Band Microwave Imaging Antenna"
V. Borra, S. Itapu, J. Garretto, R. Yarwood, G. Morrison, P. Cortes, E. MacDonald, F. Li
ECS Transactions, volume 107, issue 1, p. 8631
-
2021
"Unit cell estimation of volumetrically-varying permittivity in additively-manufactured ceramic lattices with X-ray computed tomography"
E. Burden, Y. Oh, B. Mummareddy, D. Negro, P. Cortes, A. Du Plessis, E. MacDonald, J. Adams, F. Li, R. Rojas
Materials \& Design, volume 210, p. 110032
-
2021
"Mechanical properties of material jetted zirconia complex geometries with hot isostatic pressing"
B. Mummareddy, D. Negro, V. Bharambe, Y. Oh, E. Burden, M. Ahlfors, J. Choi, A. Du Plessis, J. Adams, E. MacDonald, P. Cortes
-
2021
"A 3-D printed UWB microwave imaging antenna"
V. Borra, S. Itapu, R. Yarwood, J. Garretto, P. Cortes, E. MacDonald, F. Li
SPAST Abstracts, volume 1, issue 01
-
2019
"Heat retention modeling of large area additive manufacturing"
K. Choo, B. Friedrich, T. Daugherty, A. Schmidt, C. Patterson, M. Abraham, B. Conner, K. Rogers, P. Cortes, E. MacDonald
Additive Manufacturing, volume 28, p. 325--332
-
2019
"Digital Manufacturing of Pathologically-Complex 3D Printed Antennas"
K. Johnson, M. Zemba, B. Conner, J. Walker, E. Burden, K. Rogers, K. Cwiok, E. MacDonald, P. Cortes
-
2016
"Identification of peptide sequences that selectively bind topentaerythritol trinitrate hemisuccinate-a surrogate of PETN,via phage display technology"
G. Kubas, W. Rees, J. Caguiat, D. Asch, D. Fagan, P. Cortes
Peptide Science, volume 108, issue 2, p. e22997
-
"Transient Thermal and Electrical Characteristics of a Cylindrical LiFeS2 Cell with Equivalent Circuit Model"
K. Alsharif, A. Pesch, V. Borra, P. Cortes, E. MacDonald, F. Li, K. Choo
Dimensions [mm], volume 14, p. 50--5
-
Pedro Cortes is Assistant Professor in the Materials Science and Engineering Program and in the Civil/Envtl. & Chemical Engineering Department. His main research areas of interest are smart-functional structures, composite materials and sensors. Currently, Dr. Cortes investigates the structure-property relationship of lightweight foam structures and multifunctional composites constructed via additive manufacturing.
- Research Focus
Smart-functional structures, composite materials and sensors.
- Expertise
His main research areas of interest are smart-functional structures, composite materials and sensors. Currently, Dr. Cortes investigates the structure-property relationship of lightweight foam structures and multifunctional composites constructed via additive manufacturing.